Product

Fuji servo drive and motor

Name: Maa Umiya Industries
Address: Ahmedabad, Gujarat, Ahmdabad, Gujarat, IN
Telephone: +917990862798

Basic performance: High-speed and high-precision control is realized by the basic performance at the highest level in the industry.
Speed and frequency response at 3.2kHz realizes ultra-high-speed control: Fuji's proprietary control algorithm achieves a speed and frequency response at 3.2kHz, the highest level in the industry. This reduces the tact time, enabling high-speed control.
Maximum instantaneous torque of 350%* enables response to high-speed commands: The maximum instantaneous torque of the servo motor is now as high as 350%. This is applicable only to certain models.
The 24-bit fine resolution INC/ABS encoder significantly improves the precision of control: The encoder resolution is now as high as 24 bits. This provides much higher control precision than before, enabling high-precision control.
Safer operations are ensured by various safety functions: Standard equipment includes the STO function defined in the international standard IEC61800-5-2. In addition, the WSU-ST1 option adds support for SS1, SLS, SBC, and SSM.

WhatsApp for Price

Equipped as standard with STO (Safe Torque Off): Upon receiving an input signal from external equipment, the servo system shuts off the output from the servo amplifier and enters into free-run mode.
Support for SS1 (Safe Stop 1): Receiving an input signal from external equipment, the servo system operates the STO function when the speed is reduced to the specified value or the specified period of time elapses.
Support for SLS (Safely Limited Speed): The servo system monitors whether or not the speed limit value is exceeded and, if exceeded, enters into STO mode.
Support for SSM (Safe Speed Monitor): The servo system outputs the SSM signal when the specified speed is exceeded.
Support for SBC (Safe Brake Control): The SBC signal is an output signal for controlling an external brake and operates synchronously with STO.

Transparent communication allows you to configure multiple amplifiers from a single central location: You can use the transparent communication feature to configure the parameters of multiple servo amplifiers from a single PC via the motion controller. In addition, connection with Fuji's MONITOUCH allows Wi-Fi communications with servo amplifiers.
A single CPU performs both sequence and motion control: Adding a single unit of MICREX-SX eliminates the need of a module dedicated to motion control, thus significantly reducing the initial cost. Work efficiency is dramatically improved by supporting both sequence and motion with a single programming tool.
Directly connectable with a single SX bus and easy to wire and extend: Just a single bus cable completes the connection between the controller and servo. Additional control axes can also be connected easily using a bus cable.
Broad range of functional software "FBs" raises development efficiency: Various software parts, FBs (function blocks), are available free of charge. By appropriately combining FBs, you can build a motion program for a large-scale system in a short time.

Related Products